Most innovative companies for 11/08/2022 (new inventions)
Exciting new inventions from Hyundai Motor Company, Toyota Jidosha Kabushiki Kaisha, Illinois Tool Works Inc., Gm Global Technology Operations Llc And Ford Global Technologies, Llc
This is a weekly article summarizing a handful of inventions from the most innovative companies in the world. The summaries are created by an A.I. and proof-read by a human before publication. Attempts are made to ensure accuracy of the descriptions, but it is very much a work in progress. Each invention description is preceeded by a poem about the invention that is written by the A.I. I have found the limerick is actually quite good at explaining the invention in simple terms. Enjoy!
Hyundai Motor Company
Hydrogen reforming system cleans up air pollution
What is this invention?
Hydrogen reforming system
There was a hydrogen reforming system
That included a reformer and transformer
To generate mixed gas and remove CO2
A pressure swing adsorption unit purified the H2
And a heat exchanger was used to control the temperature
Looking to take your hydrogen fuel cell technology to the next level? Check out Hyundai's new reforming system! This amazing piece of equipment is designed to help you produce clean, renewable hydrogen from regular gas. By using a combination of reformers, transformers and pressure swing adsorption units, this system is able to remove carbon monoxide from mixed gas generated during the reforming process. This purified gas is then sent on its way to your hydrogen fuel cell - ready for use in vehicles or other industrial applications! Not only does this system improve efficiency and production rates, but it also helps you stay compliant with government regulations regarding emissions. If you're looking for an innovative way to power your vehicle or factory, look no further than Hyundai's Hydrogen reforming system!
This patent describes a hydrogen reforming system, which includes a reformer that generates first mixed gas through a reforming reaction between fuel gas and water, a transformer that is fed with the first mixed gas and generates second mixed gas from which carbon monoxide is removed by a water gas shift reaction, and a pressure swing adsorption unit that purifies and separate hydrogen from the second mixed gas. A heat exchanger is provided between the reformer and the transformer to control temperatures of the first mixed gas and the second mixed gas through heat exchange with water. A water feeder is also provided to supply water to the heat exchanger. The control value adjusts a flow rate of water discharged from the water feeder.
US Patent 11491456
TOYOTA JIDOSHA KABUSHIKI KAISHA
High Capacity and Durable Oxygen Storage Material Found
What is this invention?
Oxygen storage material
There once was an oxygen storage material
With high capacity and thermal durability
Some of the La sites in La2CuO4
Were replaced by Ce with a K2NiF4-type crystal structure
The resulting composition was La(2.00-x)CexCuO4 (0.20≥x>0.00)
And it could also be supported by a precious metal like Pt, Pd or Rh
Looking for a high-capacity oxygen storage material that can handle high temperatures and heavy loads? Look no further than the invention described here! This new material has been designed to have incredibly high oxygen storage capacity, as well as superior thermal durability. In addition, it features some La sites of La2CuO4 with a K2NiF4-type crystal structure replaced by Ce - giving it even more potential for storing and releasing oxygen during combustion. The composition of this oxygen storage material is also very versatile, allowing you to choose the right combination of metals to best suit your needs. Finally, we're proud to announce the launch of our latest product: an exhaust gas purification catalyst made entirely from this amazing oxygen storage material! By using this unique catalyst in your vehicle's exhaust system, you'll be able to improve air quality while reducing harmful emissions. Give us a call today and see how we can help you get the most out of your Oxygen Storage Material!
The invention provides an oxygen storage material having high oxygen storage capacity and high thermal durability. The oxygen storage material of the invention has some of the La sites of La2CuO4 with a K2NiF4-type crystal structure replaced by Ce. The oxygen storage material may have the composition La(2.00-x)CexCuO4 (0.20≥×>0.00). The oxygen storage material may also have a precious metal supported. The precious metal may be Pt, Pd or Rh. The exhaust gas purification catalyst is an exhaust gas purification catalyst comprising an oxygen storage material according to the invention
US Patent 11491470
Illinois Tool Works Inc.
Portable Advanced Process Module System Delivers Advanced Welding
What is this invention?
Portable advanced process module
The portable advanced process module system
Includes a welding power source, an advanced module,
And a wire feeder that are all separately enclosed
In suitcase style enclosures with disconnectable means
Between the portable advanced process module and the wire feeder.
Welding has come a long way in the past few decades, and portable advanced process modules (APMs) have played a big role in this progress. Today we are introducing the Illinois Tool Works Inc. Portable Advanced Process Module system - a suitcase-style module that can be used to perform advanced weld processes at great distances from a main welding power source. With its power supply connected directly to the wire feeder, this module is perfect for applications where you need to weld at far away locations without having to carry an entire welding rig with you. Not only does this system make Welding easier than ever before, but it also keeps your working area small and light - perfect for on-the-go projects. Give us a call today and let us show you how our APM system can help take your welding skills to the next level!
The portable advanced process module system includes a welding power source, an portable advanced process module, and a wire feeder. The portable advanced process module and the wire feeder are separately enclosed in suitcase style enclosures with disconnectable power and communication means between the portable advanced process module and the wire feeder. The processing unit includes power electronics to enable advanced weld processes that can be delivered to the wire feeder and a welding work piece. The portable advanced process module is powered by a DC bus that can be supplied by a welding power source. Connecting the portable advanced process module between the welding power source and the wire feeder enables advanced welding processes to be accomplished at great distances from the main welding power source. Separating the power electronics into the portable advanced process module and maintaining a standard suitcase wire feeder form factor keeps the welding equipment used in the working area envelope small, light, and Portable.
US Patent 11491573
ILLINOIS TOOL WORKS INC.
The Secure Way to Weld
What is this invention?
Contact tip rotary lock of a welding torch
There once was a welding torch system,
With a diffuser assembly that had a locking mechanism.
The contact tip was rotated to align the locking elements,
And then it was securely locked in place.
Welding is a dangerous trade, and it's important that contact tips are securely locked in place during operations. One of the most common ways to do this is with a rotary lock. Illinois Tool Works Inc. has developed a unique welding torch system that includes a diffuser assembly and contact tip. The locking mechanism on the diffuser assembly can secure the contact tip within the unit, while also allowing for easy rotation of the contact tip within the diffuser assembly. This ensures that the locking elements are always in alignment with the locking mechanism, preventing accidents and ensuring proper weld quality every time.
A welding torch system includes a diffuser assembly that includes a locking mechanism to receive a contact tip. The locking mechanism is configured to interact with the locking elements on the contact tip to secure the contact tip within the diffuser assembly. The contact tip is rotated within the diffuser assembly to securely align the locking elements with the locking mechanism.
US Patent 11491574
GM GLOBAL TECHNOLOGY OPERATIONS LLC
A new way to weld two or more overlapping metal workpieces
What is this invention?
Method for laser welding metal workpieces using a combination of weld paths
There once was a method of welding
With two pieces of metal overlapping
The laser beam spot was advanced
To form an elongated melt puddle
The first weld path and the second did overlap
Are you looking for a new way to weld metal workpieces together? If so, you'll love the GM Global Technology Operations LLC laser welding method. This innovative system uses two or more overlapping weld paths to create an elongated melt puddle. This molten state allows the beam spot to be conveyed through the puddle and form a strong weld without having to stop and start again. This makes for a much faster and more reliable Welding process overall!
The method of laser welding together two or more overlapping metal workpieces includes advancing a beam spot of a laser beam relative to a top surface of the workpiece stack-up along a first weld path in a first direction to form an elongated melt puddle. The first weld path and the second weld path overlap so that the beam spot of the laser beam is conveyed through the elongated melt puddle when the beam spot is advanced along the second weld path.
US Patent 11491580
Illinois Tool Works Inc.
Keep your hands safe with this splash guard for a grinder/polisher!
What is this invention?
Splash guards for grinder/polisher machines and grinder/polisher machines having splash guards
There once was a splash guard for grinders
That prevented hands from getting pinched between the platen and the guard
With an inner edge that was spaced at least 2.5 centimeters from the outer edge of the platen
The operator's hands were safe during the grinding operation
Looking for a splash guard that will keep you and your machine safe while grinding or polishing? Look no further than Illinois Tool Works Inc.! Their splash guards are designed to prevent splashing during operation, which is especially important when working with high-powered machines like grinders and polishers. Not only do they offer a durable design that won't wear down quickly, but their recesses also help keep your hands from getting pinched between the platen and the guard. If you're in the market for a new splash guard, be sure to check out Illinois Tool Works' website!
Apparatus and systems are disclosed of a splash guard for a grinder/polisher having a base, a bowl, and a platen having an outer edge to prevent splashing during the grinding/polishing operation. The splash guard includes an inner sidewall, a lower rib, and outer sidewall, and an upper rib. The lower rib has an inner edge that is spaced at least 2.5 centimeters from the outer edge of the platen to prevent pinching of an operator's hands between the platen and the splash guard. The splash guard may also include a recess formed by the upper rib, outer wall, and lower rib, and at least a portion of an inner edge of the upper rib is extending further inwardly towards that platen than the inner edge of the lower rib.
US Patent 11491611
TOYOTA JIDOSHA KABUSHIKI KAISHA
Communication System that Includes a Camera and Microphone for Ensuring Privacy
What is this invention?
Communication system and method for controlling communication system
There once was a camera that could photograph a user's face.
The control unit would identify the position of the mouth, and then place
the head part in a region of the beam-forming so that the user's voice could be heard.
Do you ever feel like your conversation partner is always a step ahead of you? Maybe they know what you're going to say before you even open your mouth, or maybe they just have a really good sense of humor. Whatever the case may be, it can be frustrating not being able to keep up with them. But now there's a solution! The TOYOTA JIDOSHA KABUSHIKI KAISHA Communication System has been designed specifically to help overcome this obstacle by allowing users to photograph one another and then use that information to control the position of their heads. By including an image of the other person in the beam-forming of their microphone, communication partners can easily be located and communicated with no problem at all. Whether you're trying to ask someone out on a date or just want to get along better with your friends, this system has everything you need!
The communication system includes a camera that is able to photograph a user and a microphone that is able to form a beam-forming in a specific direction. The control unit identifies the position of the mouth of the user using an image of the user taken by the camera and controls the position of a head part so that the identified position of the mouth of the user is included in a region of the beam-forming.
US Patent 11491660
GM GLOBAL TECHNOLOGY OPERATIONS LLC
Robot Automobile Door Hinge Installation System Includes Flexible Servo Motor
What is this invention?
Flexible robot door hinge installation system
There once was a man from Nantucket
Who had an automobile door hinge installation system
It included a servo-linear positioning device
Which made it easy to install door hinges
Now he can fix them without even having to duck it!
Do you ever find yourself struggling to get that pesky door hinge installed on your car? Well, with this innovative system from GM Global Technology Operations LLC, the installation process will be a breeze! The hinge servo-linear positioning device includes at least one servo-motor and at least one hinge effector. These devices are respectively able to hold and position the door hinge, so all you have to do is fasten it in place and you're good to go! This system is perfect for those times when you don't have any extra hands available or just want an easy installation. With its sleek design and easy-to-use features, this system is sure to make your life easier. So what are you waiting for? Give it a try today!
The automobile vehicle flexible robot door hinge installation system includes a hinge servo-linear positioning device. The hinge servo-linear positioning device includes at least one servo-motor and at least one hinge effector releasably holding and positioning a vehicle door hinge. A fastener servo-linear installation device is also provided. This allows for precise, easy installation of the door hinges in your car or truck.
US Patent 11491662
Illinois Tool Works Inc.
Lumber Handling and Cutting Apparatus with Incoming Material Conveyor Assembly, Material Infeed Assembly, Cutting Assembly, Material Outfeed Assembly,
What is this invention?
Lumber handling and cutting apparatus
There once was a lumber handling device
That had an infeed and conveyor assembly
It also had a cutting machine
To make sure the lumber was clean
And an outfeed conveyor for the debris
Looking to upgrade your lumber handling and cutting capabilities? Check out the Illinois Tool Works Inc. Lumber Handling and Cutting Apparatus! This system features an incoming material conveyor assembly, a material infeed assembly adjacent to the incoming material conveyor assembly, a cutting assembly adjacent to the material infeed assembly, a material outfeed assembly adjacent to the cutting assembly, and a printer assembly adjacent to the incoming material conveyor assembly and the material infeed assembly. This system is perfect for businesses that need efficient lumber handling and cutting without having to sacrifice quality or speed. With this system, you can quickly move large amounts of wood through your facility while maintaining high accuracy levels. Whether you are looking for an entry-level solution or something more advanced, the Illinois Tool Works Inc. Lumber Handling and Cutting Apparatus has what you are looking for!
The lumber handling and cutting apparatus of various embodiments includes an incoming material conveyor assembly, a material infeed assembly adjacent to the incoming material conveyor assembly, a cutting assembly adjacent to the material infeed assembly, a material outfeed assembly adjacent to the cutting assembly, and an outgoing material conveyor assembly adjacent to the cutting assembly. The printerassembly is also adjacent to the incomingmaterial conveyor assembly and the material infeed assembly. Various embodiments of the present disclosure provide for efficient lumber handling andcutting by providing an organized system that efficiently conveys materials into and out ofthe various assemblies.
US Patent 11491681
Ford Global Technologies, LLC
Method for the Treatment of Residual Thermoplastic Powder from Additive Manufacturing Process
What is this invention?
Method for the treatment of residual thermoplastic powders
There once was a method for treating
Residual thermoplastic powder
It involved compressing it into granules
With two rotating roller elements
Then deflecting the granules radially with a cam mechanism
Additive manufacturing is quickly becoming a popular choice for manufacturers looking to create high-quality parts at a lower cost. One of the challenges that often arises during this process is the removal of residual thermoplastic powders (RTPs). Traditional methods such as grinding and milling can be time-consuming and expensive, so Ford Global Technologies, LLC has developed a new method for treating RTPs. The process involves compressing the powder into granules as raw material for a primary shaping process, then using a pressing apparatus with two roller elements rotating in opposite directions and having lateral surfaces adjacent to one another in a pressing area. This combination results in the powder being compressed into granules in the pressing area. A cam mechanism positioned within one of the roller elements and configured to deflect the plurality of molding elements radially as a function of an angle of rotation of the roller element can be included. This system has many benefits over traditional methods, including faster processing times and reduced costs. If you are looking to reduce your overall manufacturing costs or improve your product quality, look no further than additive manufacturing!
The method for the treatment of residual thermoplastic powder from an additive manufacturing process includes providing the powder, compressing it into granules with two rotating roller elements, and deflecting the granules radially with a cam mechanism. This can help to reduce or eliminate any leftover powder that may be present after printing or other processes.
US Patent 11491726
Toyota Jidosha Kabushiki Kaisha
Preventing Oxidation and Degradation with This Method
What is this invention?
Method for manufacturing fiber reinforced resin molded article, and manufacturing device thereof
There once was a method for making fiberglass
That would prevent oxidation and degradation
You just had to fill the mold with inert gas
And then close the upper mold with a gap
Manufacturing fiber reinforced resin molded articles can be a difficult and time-consuming process. One method that has been proven to be effective at preventing oxidation and degradation of the liner making up the preform is by filling inert gas into the mold prior to pouring resin into it. This not only helps to prevent these problems, but also saves time in the long run as it reduces the need for post-processing steps. With this new technology available, manufacturers now have an even better way of producing high quality fiber reinforced resin molded products!
The patent provides a method for manufacturing fiber reinforced resin molded articles that are capable of preventing oxidation and degradation of the liner making up the preform at high temperatures. The method includes filling inert gas into the mold before pouring resin into the mold, closing an upper mold placed with a gap with the preform, and bringing the preform closer to the mold.
US Patent 11491744
GM Global Technology Operations LLC
Methods for Forming Sealed Composite Components with Bi-Material Interfaces
What is this invention?
Methods for forming composite components with sealed bi-material interfaces
There once was a method for making
Composite components with sealed bi-material interfaces
You'd apply sacrificial material to the substrate's surface
Then over-mold it till the over-molding material covers
At least some of the sacrificial material and the substrate too
Methods for forming composite components with sealed bi-material interfaces are a big hit with the engineering community. These methods allow for the creation of complex, high-quality components that are difficult to manufacture using traditional methods. One example of this is the GM Global Technology Operations LLC sealant method. This process involves applying a sacrificial material to a surface of a substrate, over-molding the substrate and the sacrificial material with an over-molding material such that the over-molding material covers at least a portion of the sacrificial material and at least one surface of the substrate, removing the sacrificial material by deflagration to form a composite component with a channel between the substrate and the over-molding material, introducing an uncured sealant into the channel, and curing it to form a sealed composite component. Once cured, this structure can be removed in two separate steps - first by deflagration to remove any excess sealant, and then by peeling off any residual adhesive. The resulting structure is highly resistant to wear and tear - perfect for use in harsh environments or in demanding applications where reliability is key. With so many benefits on offer, there is no reason not to give these methods a try!
This document describes a method for forming composite components with sealed bi-material interfaces. The method includes applying a sacrificial material to a surface of a substrate, over-molding the substrate and the sacrificial material with an over-molding material such that the over-molding material covers at least a portion of the sacrificial material and at least one surface of the substrate, removing the sacrificial material by deflagration to form a composite component with a channel between the substrate and the over-molding material, introducing an uncured sealant into the channel, and curing the sealant to form a sealed composite component. The sealed composite component can include a passage, encircled by the channel, extending between the substrate and the over-molding material.
US Patent 11491749
HYUNDAI MOTOR COMPANY
Air-Conditioner Casing for Air Conditioners on Buses Comes with Guidance
What is this invention?
Modular casing for rooftop air conditioner for bus
There once was an air conditioner
That had a casing with two bases
The shrouds were installed in between
To determine the number based on the capacity
Of the air conditioner
Looking for an air-conditioning solution that can accommodate even the largest buses? Look no further than the HYUNDAI MOTOR COMPANY modular casing! This product is specifically designed to fit on top of rooftop air conditioners, giving your bus a comfortable and cool ride. The casing includes two bases which are spaced apart from each other, as well as one or more shrouds which can be connected and installed in accordance with your particular needs. If you have a large capacity air conditioner, don't hesitate to give this product a try - you won't regret it!
The air-conditioner casing includes a pair of bases, first and second bases which are installed to be spaced apart from and opposite to each other. The shrouds are coupled in a space between the first and second bases, in which the number of shrouds to be connected and installed in the casing may be determined based on a capacity of an air conditioner.
US Patent 11491842
TOYOTA JIDOSHA KABUSHIKI KAISHA
How to reduce electric power consumption while pre-air conditioning your vehicle cabin
What is this invention?
Vehicle control device
There once was a car whose heater would sputter
The owners were worried it might just blow a gutter
But when they found out that the AC would cut power
They decided it wasn't worth fixing, not even an hour
Summer is here, and that means it's time for the dreaded heat wave! While some of us may be looking forward to the scorching weather, others may be dreading the extra work that comes with it. Luckily, there are a few nifty inventions available to help make life a little easier. One such invention is the Toyota Jidosha Kabushiki Kaisha Vehicle Control Device. This device monitors how much electric power is being used in your car, and if usage exceeds a certain limit (usually set during cold weather), then automatic actions are taken to reduce energy consumption. For example, if you're using your air conditioner constantly while driving in summer conditions, this device will automatically restrict its rotation speed so as not to waste energy unnecessarily. Not only does this save you money on your electricity bill, but it can also improve the temperature environment in your car - making it more comfortable for you and your passengers! So whether you're looking for ways to beat the heat or just want to make life a little easier - check out these amazing inventions!
In a vehicle cabin, electric power is consumed when the temperature exceeds a certain limit. When this happens while an auxiliary heating device is operating, the device's operation is stopped. However, if the electric power consumption exceeds permission levels while the auxiliary heating device isn't in use, then the air conditioner's compressor will be restricted to help keep the cabin cooler.
US Patent 11491849
Hyundai Motor Company
"Dryer Air Conditioner: Keep Your Vehicle Cool and Clean!"
What is this invention?
Air conditioner for vehicle
There once was an air conditioner for a car
That had a dryer attached, so it could go far
It would adjust the temperature and humidity
And simultaneously dry clothes, shoes, or anything you see
Summer is here and with it comes the unbearable heat! If you're like most people, you dread going outside because of the intense heat. But what if there was a way to stay cool without having to go outside? Well, that's exactly what the Hyundai Motor Company air conditioner for vehicles offers. This amazing device connects to an indoor air conditioner within your car and adjusts both the temperature and humidity levels within the vehicle. This means that not only will you be able to stay comfortable while on your drive, but you can also keep your clothes dry too! Plus, since this system operates simultaneously as a dryer, all of your laundry will be done in record time! So whether you're looking for an innovative way to beat the heat or just want to speed up your laundry process, look no further than the Hyundai Motor Company air conditioner for vehicles.
This document describes an air conditioner for a vehicle, which includes a dryer connected to an indoor air conditioner that adjusts the temperature and humidity within the vehicle. The air conditioner simultaneously dries a dry subject such as clothes, shoes, or the like.
US Patent 11491850
Toyota Jidosha Kabushiki Kaisha
Control Fuel Cell Vehicle to Avoid Problems Due to Unanticipated Stopping of Power Feeding
What is this invention?
Method for controlling fuel cell vehicles and fuel cell vehicles
There once was a fuel cell vehicle,
Whose state began to deteriorate.
A driving device supplied no fuel,
So power generation stopped with a whirr.
To avoid any problems or strife,
The method for controlling is: issue a warning sign!
Are you ever worried about what will happen if your fuel cell vehicle runs out of power? Toyota has come up with a solution - a warning system that will notify drivers outside the vehicle before the fuel cell stops generating electricity. This system is especially important in situations where unexpected stopping of power feeding can cause problems such as deterioration of the fuel cell or a failure of the driving device to supply fuel. By issuing warnings ahead of time, drivers can avoid any potential issues and keep their vehicles running smoothly. If you're looking for an innovative way to keep your car running smoothly, this is it!
The method for controlling a fuel cell vehicle 100 includes determining that a state of the fuel cell 20 exceeds a limiting point where deterioration of the fuel cell 20 or a failure of a driving device to supply fuel to the fuel cell 20 occurs during external power feeding. Warning is then issued to outside of the vehicle 10 before the fuel cell 20 stops power generation. This allows problems due to unexpected stopping of power feeding to be avoided.
US Patent 11491893
TOYOTA JIDOSHA KABUSHIKI KAISHA
Hanging Type Seat Mounted in Vehicle Provides Comfortable Support
What is this invention?
Hanging type seat
There once was a seat that was hung
It had front and rear tools, plus some transverse ones
The main body was supported by all three
And it held an occupant very snugly
Do you ever feel like your car seat just doesn't fit well? It's not just a matter of adjusting to fit the contours of your body - sometimes seats just don't seem to hang properly. If this is you, then you may be interested in trying out a hanging type seat. These seats are mounted in a vehicle and supported by one or more front hanging tools, one or more rear hanging tools, and two or more transverse hanging tools. Once installed, the seat main body hangs down and is held in place by these attached tools. This eliminates the need for you to constantly adjust the position of your car seat - making it much easier on your back! Hanging type seats are becoming increasingly popular due to their numerous benefits. Not only do they make it easier for you to adjust your car seat, but they also reduce strain on your neck and spine during long trips. If you're looking for an upgrade that will improve both your comfort and safety while driving, then check out a hanging type seat!
This document describes a hanging type seat that is mounted in a vehicle. The seat has a main body that supports an occupant from below, and one or more front hanging tools, one or more rear hanging tools, and two or more transverse hanging tools which are passed across both sides of the main body. The main body is hung and held by the three tools.
US Patent 11491900
HYUNDAI MOTOR COMPANY
Adjustable Headrest Device Allows Vehicle Rotation
What is this invention?
Device for adjusting position of headrest for vehicle
There once was a device for adjusting
A position of a headrest for a vehicle
It stay mounted on the seatback frame
And included a mainframe with rotation guide hole
Elevation device was also mounted on the stay and mainframe
With a rotating frame that first end portion inserted into the stay
Configured to ascend or descend along it
The rotating device was then mounted on the rotating frame and guide hole of mainframe
Assembling the headrest frame to the rotating one in the end
Do you ever find yourself wishing you could adjust the position of your headrest while driving? Well, now there's a device available that can help! The Hyundai Motor Company has invented a headrest adjustment system that uses a stay mounted on the seatback frame to allow the main frame to ascend or descend along the stay. This allows for easy and accurate adjustments of your headrest without having to remove your seat or reach up high. The elevation device also allows the main frame to move in either direction, making it easy to get just the right angle for your comfort. Plus, with a rotating frame and rotating device, you can easily make any necessary adjustments even when driving at high speeds. If you're looking for an innovative way to improve your driving experience, then check out this new product from Hyundai!
The device for adjusting a position of a headrest for a vehicle includes: stay mounted on seatback frame, main frame including rotation guide hole inserted into stay, elevation device mounted on main frame and stay, rotating frame including first end portion inserted into stay and configured to ascend or descend along stay, rotating device mounted on rotating frame and rotation guide hole of main frame, and headrest frame assembled to rotating frame.
US Patent 11491902
FORD GLOBAL TECHNOLOGIES, LLC
Automated Delivery with Vehicle Parcel Tray Systems
What is this invention?
Systems and methods for deploying parcel trays on hinged vehicle closure members
There once was a type of vehicle,
Parcel tray system designed to help move
Goods or other items 'tween authorized users,
And the vehicle it did improve.
May be deployed during automated delivery,
Configured to move with closure member--
This could make delivery personnel's task quick and neat!
Have you ever been in a situation where you needed to exchange goods or other items with someone inside of a vehicle? Well, now there's a way to do it without even getting out of your car! Ford Global Technologies, LLC has come up with the amazing parcel tray system. This system is specifically designed for exchanging goods or other items between authorized users and the vehicle. The parcel tray can be automatically deployed during an automated delivery process, which makes it super convenient for customers. Plus, the actuator system that links movement of the parcel tray with that of the closure member ensures that everything moves together seamlessly - no more missed deliveries due to misaligned trays! If you're looking for a way to improve your customer service experience then look no further than Ford Global Technologies, LLC's parcel tray systems.
The patent describes a type of vehicle parcel tray system that is designed to help with the exchange of goods or other items between authorized users and the vehicle. The system may be automatically deployed during an automated delivery process, and it may be configured to move in unison with a vehicle closure member. This could make it easier for delivery personnel to complete their tasks quickly and efficiently.
US Patent 11491919
Ford Global Technologies, LLC
Motor Vehicle with Rear Module That Pivots About a pivot Axis That Extends Transversely with Respect to the Vehicle Longitudinal Direction
What is this invention?
Rear module for a motor vehicle, and a motor vehicle having a rear module
There once was a car with a tailgate
That could pivot about its axis plate
With a frame element strong
It could stay closed for long
To keep all the contents in place!
Do you ever find yourself wishing you could lock your tailgate closed when not in use? Well, now there is a solution! The Ford Global Technologies, LLC rear module allows for easy closure of the tailgate without having to remove any panels or hardware. Simply set up the first fastening assembly to selectively lock the rear module in a closed state, and then secure the second fastening assembly to the vehicle body. This way, you can be sure that your cargo is safe and secure at all times. Not only does this system make loading and unloading much easier, but it also keeps your vehicle looking tidy - no more lost keys or forgotten straps! If you're looking for an innovative way to keep your vehicle organized and clean, then look no further than the Ford Global Technologies, LLC rear module!
A rear module can include a tailgate configured to pivot about a pivot axis that extends transversely with respect to the vehicle longitudinal direction, and a frame element that extends transversely with respect to the vehicle longitudinal direction and is integrated into the tailgate. The frame element has a first fastening assembly at its respective ends. The first fastening assembly being set up to selectively lock the rear module in a closed state of the tailgate together with second fastening assembly which are configured on the rear-side vehicle body. A motor vehicle can have such a rear module.
US Patent 11491920
Hyundai Motor Company
Vehicle safety device controlled based on occupant's size
What is this invention?
Vehicle and control method thereof
There was a car with a safety device
That was controlled in response to a collision
The controller would determine
Whether to activate the safety device
Based on factors like vehicle type, speed, and seat position
Are you always on the lookout for a way to improve your safety while driving? If so, you will love this new innovation from Hyundai Motor Company. The Vehicle and Control Method thereof includes a safety device that can be controlled in response to various factors such as vehicle type, collision speed, seat position of occupant, gender, and infant status. By predicting potential collisions and determining whether to activate the safety device, you can avoid dangerous situations before they happen. This system is becoming more popular each day because it offers drivers an extra layer of security when out on the open road. Keep up the good work Hyundai Motor Company - we look forward to seeing more innovative products like this in the future!
The patent describes a vehicle including a safety device that is configured to be controlled in response to a prediction of a collision state and/or collision position. The controller may determine whether to activate the safety device based on at least one of a vehicle type, collision speed, seat position of an occupant, whether the occupant wears a seat belt, gender of the occupant, infant status of the occupant, or size of the occupant.
US Patent 11491938
GM GLOBAL TECHNOLOGY OPERATIONS LLC
System detects improper posture in drivers
What is this invention?
System and method for detecting improper posture of an occupant using a seatbelt restraint system
There once was a system devised
To check if you're driving with proper posture.
It measures the seatbelt's length,
Compares it to images stored,
And tells you if you need to sit up straighter.
Are you looking for a way to prevent your passengers from sitting improperly in their seat belts? If so, then you may be interested in this new innovation from GM Global Technology Operations LLC. The system uses a variety of sensors within the vehicle to determine when an occupant is not properly restrained by their seat belt. This information is then used to determine if improper posture has occurred and, if it has, to provide appropriate corrective action.This system can be particularly useful during accidents where unrestrained passengers may cause significant damage or injure others. By using this technology, you can help keep everyone safe while ensuring that they are properly restrained during an emergency situation. Give it a try - you won't regret it!
The system and method described herein can be used to determine when an occupant in a motor vehicle seat and restrained by a seatbelt restraint system has improper posture. This can be done by analyzing the presence of the seatbelt latchplate in the seatbelt buckle, determining whether the difference between the first seatbelt payout length when the seatbelt is buckled and the second seatbelt payout length is greater than a Seat Belt Payout Length Threshold, comparing captured images of occupants to at least one stored image or posture zone, and determining whether improper posture exists based on this comparison.
US Patent 11491940
FORD GLOBAL TECHNOLOGIES, LLC
Inflate Your Way to Safety: New Airbag Assembly
What is this invention?
Pillar-supported airbag for extending vehicle seat
There once was an assembly for a vehicle,
Which included a floor and a roof spaced apart.
A pillar extended from the floor to the roof,
And an airbag was supported by that part.
The airbag could inflate from its position flat,
Extending around the seat in one deft motion.
Do you ever find yourself reaching for the airbag in your car just in case? Well, Ford has come up with a nifty solution to this problem - an airbag that is supported by a pillar! This system not only ensures that the airbag will deploy properly in the event of an accident, but it also allows for a more comfortable seating position. Not only does this add safety to your ride, but it can also make long road trips much more enjoyable. If you're looking for something innovative and cutting edge, then check out Ford's latest invention - you won't be disappointed!
The patent describes an assembly for a vehicle, which includes a vehicle floor and a vehicle roof spaced from the vehicle floor. A pillar extends from the vehicle floor to the vehicle roof. The assembly includes an airbag supported by the pillar. The airbag is inflatable from the pillar from an uninflated position to an inflated position. The assembly also includes a seat supported by the vehicle floor adjacent the pillar. The airbag extends around the seat when in the inflated position.
US Patent 11491948
GM Global Technology Operations LLC
Control Stability with Driver Command
What is this invention?
Architecture and methodology for integrated wheel and body dynamic controls with standard stability features
There once was a driver who swerved
To avoid hitting a bird.
He quickly regained control
thanks to the stability system of his car.
Now he drives more cautiously -- never again will he veer!
Do you ever find yourself constantly adjusting your steering to stay within your desired trajectory range when towing a trailer? With the increasing popularity of recreational vehicles and increased cargo capacity, it is important for drivers to have a way of controlling their towed vehicle. One such system is the GM Global Technology Operations LLC hitch controller. The hitch controller uses sensor data from a variety of sensors within the vehicle to determine where a trailer coupler is located and then calculates an appropriate trajectory range based on the steering angle range of the vehicle. If the detected position falls outside this calculated range, then manual intervention may be necessary in order to bring the trailer into alignment with your tow car. This type of system has many benefits over traditional Tow Vehicle Control Systems (TVCS). For one, it can more accurately predict when you will need to adjust your steering in order to stay within your desired trajectory range - minimizing potential harm caused by incorrect adjustments. Competitors will have a hard time keeping up with this latest innovation!
The patent describes a method of controlling stability of a vehicle and a stability control system for the vehicle. A driver command is determined based on driver input data, and at least one output command is sent to one or more vehicle systems to control stability of the vehicle based on the driver command. A controller sends the output command based on a control hierarchy that provides an order in which the controller controls body motion of the vehicle, wheel slip of the vehicle, and standard stability of the vehicle to control stability of the vehicle. The order dictates that the controller controls body motion of the vehicle and wheel slip of the vehicle before controlling standard stability of the vehicle. A state of one or more of the Vehicle systems is controlled based on sent output command as dictated via control hierarchy.
US Patent 11491970
Toyota Jidosha Kabushiki Kaisha
Automatic Parking Control Device Delays Vehicle's Idle Speed
What is this invention?
Automatic parking control device
There once was a car with great features
It had an automatic parking device
That could predict the speed change
And driving force, then adjust
To make sure the car stopped without issue
Do you ever find yourself in a situation where you need to stop quickly, but don't want to use your brakes? Well, Toyota has come up with the perfect solution - an automatic parking control device. This nifty little gadget is designed to help drivers park their car without having to resort to using their brakes. The automatic parking control device works by calculating how fast your car is rotating and then adjusting the target idle speed accordingly. This ensures that you will reach your desired destination without any unnecessary braking or spinning. Best of all, this system is completely automated so there's no need for any manual input - making it the perfect option for busy drivers! If you're looking for a way to improve your parking skills then be sure to check out this amazing invention from Toyota.
The patent describes an automatic parking control device that is configured to: execute a rotation prediction process to calculate a predicted idle speed change portion by advancing an actual idle speed change portion by a brake response delay time; execute a driving force prediction process to calculate a predicted driving force change portion according to the predicted idle speed change portion; execute a braking force control process to calculate a change portion of a target vehicle braking force that cancels the predicted driving force change portion and instruct it to a brake device; and, when the brake response delay time is longer than an engine response delay time, execute a rotational speed control delay process to delay the target idle speed change by a rotational speed control delay time being longer than or equal to a difference obtained by subtracting the engine response delay time from the brake response delay time.
US Patent 11491972
TOYOTA JIDOSHA KABUSHIKI KAISHA
Redefining Drive Force Control
What is this invention?
Vehicle drive system
There once was a car with a drive,
Whose system would always comply
With the driver's request--
A basic drive force control--
Which kept things running smoothly and spry.
Do you ever find yourself wishing you could just tweak the drive force a bit, without having to completely restart your vehicle? Well, with this new Toyota Jidosha Kabushiki Kaisha (TJK) Vehicle Drive System, now you can! The TJK VDS is a basic drive force control system that allows drivers to change the amount of power delivered to their car by simply changing the driving mode. This system works by monitoring wheel rotational speed and eliminating any variation caused by switching between different driving modes. This way, you can always have the perfect amount of power delivered to your wheels - no matter what mode you're in. Whether you're cruising down the highway or taking on some tricky turns in town, this system will keep everything running smooth and efficient.
The vehicle drive system executes a basic drive force control in which a vehicle drive device applies, to an own vehicle, a drive force in accordance with a request of a driver. The first drive force changing control changes the drive force applied in the basic control based on variation in wheel rotational speed. The second drive force changing control is configured to change the drive force applied in the basic control for different purpose than changing thedrive force in the first driving force controlling.
US Patent 11491980
HYUNDAI MOTOR COMPANY
Driverless Car Steers You to the Correct Lane
What is this invention?
Apparatus and method for providing driving path in vehicle
There once was a car with some sensors
That could tell it about driving conditions and other things
With an input device for commands
It could change lanes just as the driver planned
All thanks to its nifty control circuit!
Hey everyone! Hyundai has released an amazing new product for drivers - the Apparatus and Method for Providing Driving Path in Vehicle. This system is designed to help you get where you want to go without any hassle. The apparatus includes a number of sensors that are able to gather information about your vehicle and the surrounding environment. This data is then used by the control circuit to generate a traveling path for your car. If you ever need to make a lane change, this system can take care of it automatically. Overall, this is an incredibly helpful product that will save you time and hassle on your next trip!
The apparatus includes a plurality of sensors that are configured to obtain information about the vehicle and information about an external object. The steering device is also included and is configured to steer the vehicle. The input device is also included and is configured to receive a lane change command from a driver of the vehicle. The control circuit is also included and is configured to be electrically connected with the one or more sensors, the steering device, and the input device. The control circuit is configured to control the vehicle to travel along a deviated path in a driving path of the vehicle based on at least one of the information obtained by the plurality of sensors or an operation of the steering device. Additionally, in response to receiving a lane change command from a driver of the vehicle, the control circuit is configured to control the vehicle to travel along a deviated path in a target lane ofthe changed lane.
US Patent 11491984
Hyundai Motor Company
New Vehicle Feature: In-Wheel Actuators
What is this invention?
Vehicle using eccentric wheel
There was a car with some special wheels
That could change their positions on the fly
With an in-wheel actuator
It was quite a neat traktor
But it had a bit of trouble going uphill
Have you ever wished you could rotate your tires in order to change their position on the road? Well, now there's a product out there that allows you to do just that! The Hyundai Motor Company eccentric wheel system is perfect for vehicles of all shapes and sizes. This system uses an annular tire with a rotating wheel gear inside of it. This gear then connects to positioning devices on the vehicle body which allow you to rotate the tire in any direction relative to the vehicle. This gives you complete control over where your tires are positioned on the road, making it easy to make quick adjustments while driving. Whether you're changing your tire's pressure or just want to move it around for better traction, this system has you covered!
The patent describes a vehicle, which includes a vehicle body, at least one wheel, and an in-wheel actuator that rotates the tire. The positioning devices are fixed to the vehicle body and rotate the at least one wheel relative to the vehicle body to change positions of the at least one wheel relative to the vehicle body.
US Patent 11491989
GM GLOBAL TECHNOLOGY OPERATIONS LLC
Control your car with your mind!
What is this invention?
Systems and methods for communicating with vision and hearing impaired vehicle occupants
There once was a way to control
An occupant output system
With vehicle or occupant context data
You could generate an output that would be just fine
But when the occupant was vision or hearing impaired
The system had to decide on a different modality to assist
Do you ever find yourself wishing you could communicate with your passengers more effectively? Well, GM Global Technology Operations LLC has got you covered! The company has developed systems and methods that allow drivers to communicate with vision and hearing impaired occupants in their vehicles. This is a huge step forward in making driving safer for everyone involved. Not only can drivers talk to their passengers more easily, but those who are deaf or hard of hearing can also access important information without difficulty. If you have any passengers who may be affected by these conditions, make sure to check out GM's products!
The methods and systems described herein provide a way to control an occupant output system associated with a vehicle. The system receives vehicle or occupant context data from a source of vehicle context data, generates occupant message data based on the vehicle or occupant context data, and determines if an occupant associated with the occupant output system is vision or hearing impaired. When the occupant is determined to be vision or hearing impaired, the system decides on an output modality to assist the occupant and generate an output for the occupant in that mode based on the inmate message data.
US Patent 11492005
HYUNDAI MOTOR COMPANY
Control Right Handover Request Warning Alarm Activates "Minimal Risk Maneuver Driving Mode" to Avoid Dangerous Situations
What is this invention?
Autonomous driving control method and device
There once was a car that could drive
But it got in a bind and couldn't stay alive
The driver had to take control
Or else it would roll
Into a ditch or maybe off a cliff
Do you ever feel like you're fighting a losing battle when it comes to controlling your autonomous car? Well, Hyundai has come up with a solution - a control-right handover request warning alarm. When this alarm goes off, it means that the system is detecting a situation in which autonomous driving is impossible and that manual intervention is required in order to safely transfer control over to the human driver. This may seem like an overwhelming task at first, but with the help of Hyundai's minimal risk maneuver driving mode, you can rest assured that the control-right handover will be successfully transferred without any complications. So don't wait - get yourself one of these alarms and see for yourself how much easier life can become when you leave driving duties up to the experts!
The method includes detecting a situation in which autonomous driving is impossible while the vehicle operates in an autonomous driving mode, outputting a control-right handover request warning alarm, and then activating a minimal risk maneuver driving mode. The method determines human driver gaze validity based on the detected situation, determines human driver intervention validity upon determination that the human driver gaze is valid, and determines control-right handover of the autonomous vehicle based on the human driver intervention validity.
US Patent 11492016
Hyundai Motor Company
Reducing Motor Noise - A New Way to Keep Your Car Steering Smooth
What is this invention?
Apparatus and method of controlling motor driven steering
There once was a car that was quiet
Reducing the current did it
When stopped and holding the wheel
This current control did feel
Like a magic power steering lube.
Do you ever find yourself driving and suddenly realize that your steering is making all kinds of noise? If so, you're not alone. It seems like every time there's a gust of wind, or even just a bit of road noise, the steering starts to make a racket. Well, now there's an easy solution - control the noise with Hyundai Motor Company's new motor driven steering system! This ingenious invention uses both vehicle speed information and wheel speed information to determine when it is necessary to reduce the motor noise. If it is determined from either source that the vehicle is currently in a stopped state, then the system will automatically apply current to the steering motor in order to reduce any unnecessary noise. Keep your car running smoother and quieter with this amazing technology!
The present motor-applied current control may reduce motor noise when the vehicle is in a stopped state. This may be done by reducing the current to the steering motor. When it is determined from vehicle speed information or wheel speed information that the vehicle is currently in a stopped state, and when it is also determined that the steering wheel is currently in a holding state, then this current control may be performed.
US Patent 11492036
GM Global Technology Operations LLC
Vehicle Frame Detaches During Impact to Avoid Injuries
What is this invention?
Load member for small overlap frontal impact
There once was a car with a frame
That had a suspension to help it stay sane
But when an impact did occur
The suspension would detatch and the frame would incur
Now the car's owner must drive with great care!
With the increasing popularity of small overlap frontal collisions, it is important for vehicles to have a way of handling these types of impacts. One such system is the GM Global Technology Operations LLC load member. The load member attaches to the frame of your vehicle and provides extra support during an impact event. This helps reduce damage to both the vehicle and its occupants. In addition, the load member can be detached from the frame in order to allow for easier transport. Whether you're driving on a country road or taking part in a race, this system will help ensure your safety!
The vehicle frame includes a suspension component, which is detachable from the second frame member upon application of a load to the vehicle due to an impact event.
US Patent 11492043